Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1381 / 1502

mpls explicit-path
Syntax { ip | mpls } explicit-path { name name | identifier number } [ enable | disable ]
no { ip | mpls } explicit-path { name name | identifier number }
Release Information Command introduced before JunosE Release 7.1.0.
Description Defines an explicit path by name or ID number and also enables or disables the explicit
path. The
no version deletes the explicit path.
Options
•
ip—Specifies alternative keyword for compatibility with non–E Series implementations
•
mpls—Specifies JunosE MPLS implementation
•
name —Name for the explicit path; string of up to 20 characters
•
number —Number identifying the explicit path in the range 1–65535
•
enable—Reenables the explicit path that was previously disabled on the virtual router;
to prevent a partially configured explicit path from being used, do not enable it until
you have finished configuring or modifying the path
•
disable—Disables the explicit path that was previously enabled on the virtual router
Mode Global Configuration
1337 Copyright © 2010, Juniper Networks, Inc.
Chapter 13: M Commands