Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 117 / 1502

aaa tunnel tx-connect-speed-method
Syntax aaa tunnel tx-connect-speed-method { static-layer2 | dynamic-layer2
| qos | actual }
no aaa tunnel tx-connect-speed-method
Release Information Command introduced in JunosE Release 8.0.0.
Description Configures the method used to calculate the transmit connect speed of the subscriber's
access interface for establishing a tunneled L2TP session associated with a virtual router.
This speed is reported in L2TP Transmit (TX) Speed AVP 24. The router uses the
calculation method specified with the
aaa tunnel tx-connect-speed-method command
if the tunnel attributes returned from an AAA domain map, an AAA tunnel group, or a
RADIUS authentication server do not include the transmit connect speed calculation
method. The
no version removes configuration of the transmit connect speed calculation
method from the tunneled L2TP sessions associated with the virtual router.
Options
•
static-layer2—Calculates the transmit connect speed of the subscriber's access
interface based on statically configured settings for the underlying layer 2 interface
•
dynamic-layer2—Calculates the transmit connect speed of the subscriber's access
interface based on dynamically configured settings for the underlying layer 2 interface
•
qos—Calculates the transmit connect speed of the subscriber's access interface based
on settings determined by QoS
•
actual—Calculates the transmit connect speed of the subscriber's access interface as
the lesser of the
dynamic-layer2 value or the qos value
Mode Global Configuration
73 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: A Commands