Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1317 / 1502

match ipv6 next-hop
Syntax match ipv6 next-hop
{
accessListName [ accessListName ]* | prefix-list prefixListName
[ prefixListName ]* }
no match ipv6 next-hop [ [ accessListName ]* | prefix-list [ prefixListName ]* ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Matches any routes that have a next-hop router address passed by the specified access
list or prefix list. The
no version removes all next-hop match clauses from a route map
unless you specify either an access list or prefix list, in which case only the list match is
removed from the route map.
Options accessListName— String of up to 32 alphanumeric characters
•
•
prefixListName— Name of a single prefix list; string of up to 32 characters
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Policy List Configuration, Route Map Configuration
1273 Copyright © 2010, Juniper Networks, Inc.
Chapter 13: M Commands