Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1056 / 1502

ipv6 classifier-list
Syntax ipv6 classifier-list classifierName [ traffic-class trafficClassName ]
[ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ]
[ source-route-class routeClassValue ] [ destination-route-class routeClassValue ]
[ local { true | false } ]
[ source-address
ipv6Prefix | source-host ipv6Address ]
[ destination-address ipv6Prefix | destination-host ipv6Address ]
[ precedence precNum | dsfield dsFieldNum | tcfield tcFieldNum ]
[ protocol [ protocolQualifier ] ]
no ipv6 classifier-list classifierName [ classifierNumber ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Creates or modifies an IPv6 classifier control list. The no version removes the classifier
control list.
Options
•
classifierName —Name of the classifier control list entry
•
trafficClassName —Name of the traffic class to match
•
green—Matches packet color to green, indicating a low drop preference
•
yellow—Matches packet color to yellow, indicating a medium drop preference
•
red—Matches packet color to red, indicating a high drop preference
•
userPacketClassValue —User packet value to match
•
routeClassValue —Value of the source or destination route-class; in the range 0–255
•
local—Specifies traffic destined for this interface
•
true—Matches packets that are locally destined
•
false—Matches packets that are not locally destined
•
ipv6Prefix —Prefix that defines the IPv6 interface or network
•
ipv6Address —Base IPv6 address of the network route
•
precNum —Upper three bits of the traffic class byte; in the range 0–7
•
dsFieldNum —Upper six bits of the traffic class byte; in the range 0–63
•
tcFieldNum —Whole eight bits of the traffic class byte; in the range 0–255
•
protocol —Protocol type to match; tcp , udp , icmpv6 , or protocol number in the range
0–255
•
protocolQualifier— Specifies the following protocol-specific parameters:
For TCP and UDP:
•
source-port or destination-port—Specifies that a source or destination port is
matched
Copyright © 2010, Juniper Networks, Inc. 1012
JunosE 11.2.x Command Reference Guide A to M