manualshive.com logo in svg

Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

The "Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010" is a comprehensive Command Reference Manual for managing your Juniper network devices. This manual provides detailed instructions on utilizing the XML Management Protocol. Download this free manual from manualshive.com to optimize your network management capabilities.

Share
Download
background image

dhcp-external delete-binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
dhcp-external duplicate-mac-address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510
dhcpv6 delete-binding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511
diag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512
diag-level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513
dir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 514
disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515
disable-autosync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516
disable-dynamic-redistribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517
disable-incremental-external-spf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518
disable proxy lcp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519
disable-switch-on-error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
disconnect-cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
disconnect ssh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522
discovery-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523
distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 524
distance bgp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525
distance ip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526
distribute-domain-wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527
distribute-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528
dns-domain-search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529
dns-server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
dns-server (for IPv6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531
do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532
domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533
domain-authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
domain-authentication-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535
domain-id . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536
domain-message-digest-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
domain-name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539
domain-suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
domain-tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541
dont-install-routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
dos-protection-group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
drop-profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544
ds3-scramble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545
dsr-detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 546
dsu bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547
dsu mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548
duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 549
dvmrp destination profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550

Chapter 6

E Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551

e3-scramble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 552
enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553
enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554
enable ipsec-transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
enable password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 556
enable proxy authenticate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557

xix

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010

F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual preview
CLIENT SECURITY 9.00 - QUICK
Brand: F-SECURE Pages: 32
TC Electronic RESTORATION SUITE User Manual preview
RESTORATION SUITE
Brand: TC Electronic Pages: 31
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Brand: Juniper Pages: 244
AVG ANTI-VIRUS 8.5 User Manual preview
ANTI-VIRUS 8.5
Brand: AVG Pages: 234
ZyXEL Communications IPSEC VPN CLIENT Brochure preview
IPSEC VPN CLIENT
Brand: ZyXEL Communications Pages: 2
Access ATOMIZER Operator'S Manual preview
ATOMIZER
Brand: Access Pages: 16
Intel 2521131 - Intel Wasp Motherboard Quick Start Manual preview
2521131 - Intel Wasp Motherboard
Brand: Intel Pages: 1
LEI accessories MAPCREATE USA 6.3 - ADDENDUM Manual preview
MAPCREATE USA 6.3 - ADDENDUM
Brand: LEI accessories Pages: 1
Yamaha FIRESTATION Tutorial preview
FIRESTATION
Brand: Yamaha Pages: 26
Ulead MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0 Manual preview
MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0
Brand: Ulead Pages: 11
Zennio Z41 User Manual preview
Z41
Brand: Zennio Pages: 15
IBM Terminal Emulation TN5250 User Manual preview
Terminal Emulation TN5250
Brand: IBM Pages: 51
KAPERSKY SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER... Administrator'S Manual preview
SECURITY 5.5 - FOR MICROSOFT EXCHANGE SERVER...
Brand: KAPERSKY Pages: 185
FARONICS POWER SAVE - REQUIREMENTS GUIDE Manual preview
POWER SAVE - REQUIREMENTS GUIDE
Brand: FARONICS Pages: 17
FARONICS SYSTEM PROFILER - Product Data Sheet preview
SYSTEM PROFILER -
Brand: FARONICS Pages: 2
HighPoint RAID Managemen Interface Manual preview
RAID Managemen
Brand: HighPoint Pages: 28
Datavideo PPT-100 User Manual preview
PPT-100
Brand: Datavideo Pages: 15
Wavecom WISMO Quik Q2501 Customer Design Manuallines preview
WISMO Quik Q2501
Brand: Wavecom Pages: 79

Brands by name

Popular brands

Load more brands