Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1210 / 1502

l2tp drain destination
Syntax [ no ] l2tp drain destination { destinationName
| [ virtual-router vrName ] ip ipAddress }
Release Information Command introduced before JunosE Release 7.1.0.
Description Prevents the creation of new tunnels and sessions at a destination. This command works
in conjunction with the
l2tp shutdown destination command. Both commands affect
the status of the administrative state of L2TP for the destination; the l2tp drain
destination command sets the administrative state to drain. The no version allows the
creation of new tunnels and sessions at a destination.
Options destinationName —Name the router assigns to the LNS
•
•
vrName— Name of the virtual router on which the destination exists
•
ipAddress —IP address of the LNS
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 1166
JunosE 11.2.x Command Reference Guide A to M