Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 547 / 1502

delta-sampling
Syntax delta-sampling [ discontinuity-id mibId
| discontinuity-id-type { timeStamp | timeTicks } ]
no delta-sampling [ discontinuity-id ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Specifies delta sampling for the trigger you are configuring. The no version returns the
trigger to the default sampling method—absolute-value sampling.
Options discontinuity-id—Specifies a discontinuity MIB ID for the sample. The discontinuity MIB
ID monitors the sample for any discontinuity errors during the sample frequency. If a
discontinuity error occurs, the router removes the sampling for that interval.
•
•
mibId —Object ID of the discontinuity MIB attribute that you want to use for this trigger
•
discontinuity-id-type—Specifies a discontinuity ID type (either timeStamp or timeTicks).
The discontinuity ID type indicates the time value that you expect for a specific sample.
Mode SNMP Trigger Configuration
503 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: D Commands