Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 729 / 1502

host
Syntax host hostname ipAddress [ ftp [ [ userAlgorithmType ] userName
[ [ passwordAlgorithmType ] password ] ] ] | [ tftp ]
no host hostname
Release Information Command introduced before JunosE Release 7.1.0.
Description Adds or modifies an entry to the host table. The no version removes the specified host.
Options
•
hostname —Hostname to add or modify; up to 20 characters
•
ipAddress —IPv4 or IPv6 address of the host
•
ftp—Specifies that the host is an FTP server; the default protocol if neither ftp nor tftp
is specified
•
userAlgorithmType —Type of username
•
0—Indicates that the userName is unencrypted; the default
•
8—Indicates that the userName is an encrypted password
•
userName —Username used to access an FTP server (but not an NFS server); defaults
to anonymous
•
passwordAlgorithmType —Type of password
•
0—Indicates that the password is unencrypted; the default
•
8—Indicates that the password is an encrypted password
•
password —Password used to access an FTP server (but not an NFS server); defaults
to null
•
tftp—Specifies that the host is a TFTP server
Mode Global Configuration
685 Copyright © 2010, Juniper Networks, Inc.
Chapter 9: H Commands