Art. No. ..5192KRMTSD
Art. No. ..5194KRMTSD
1 Product definition
1.1 Product catalogue
Product name: Room controller display compact module 2-gang / Room controller display
compact module 4-gang
Use:
Sensor
Design:
FM (flush-mounted)
Art. No.
..5192KRMTSD / ..5194KRMTSD
1.2 Function
The compact room controller module is a TSM (pushbutton sensor basic module). The TSM
combines the functions of a KNX/EIB bus coupling unit, two single-room temperature controllers
with setpoint specification, a pushbutton sensor (2-gang or 4-gang), and a display unit in just
one KNX subscriber.
The combination of these functions makes it possible, for example, to control the light, the
blinds, and the room temperature centrally from the entry area of a room.
The room temperature controller and pushbutton sensor functions are each independent
function sections of the device with their own parameter blocks in the ETS.
The 2-gang compact room controller module possesses up to 4 control surfaces. The 4-gang
compact room controller module possesses up to 8 control surfaces. The control surfaces can
be used to operate the integrated room temperature controllers and the pushbutton sensor
functions. The functions can be configured in the ETS.
Optionally, the number of control surfaces can be expanded to include 8 additional ones by
connecting a TSEM (pushbutton sensor extension module or room controller extension module)
to the TSM. The configuration and commissioning of the TSEM are clearly structured and easy
to perform using the application program of the room controller display compact module.
Display functions:
The integrated display shows statuses of room temperature controllers and the settings of the
control operating modes for up to two rooms in the Heating and Cooling operating modes. The
TSM can show up to 17 pieces of display information, either changing cyclically or directly via a
communication object. The menu level is shown on the display, providing that it has been
enabled in the parameters. Various temperature values can be displayed in the menu level as
an option. It is also possible to change controller settings (setpoint temperatures, presence
operation, operating mode, fan control, etc) directly on the device and adjust the brightness of
the display. In addition, configurable pushbutton function icons (only in the design ranges LS
and CD!) support the operation of the button and rocker functions on the device.
Room temperature controller:
The device unites two independent room temperature controllers. Both controllers can be used
for separate single-room temperature controllers. Depending on the operating mode, current
temperature setpoint and room temperature, a variable for heating or cooling control can be
transmitted to the KNX for each control circuit. In addition to the heating or cooling basic level,
activating an additional heater and/or cooling unit means that an additional heating or cooling
unit can be used. In this connection, you can set the temperature setpoint difference between
the basic and the additional level by a parameter in the ETS. For major deviations between the
temperature setpoint and the actual temperature, you can activate this additional level to heat
up or cool down the room faster. You can assign different control algorithms to the basic and
additional stages.
Page 5 of 309
Product definition
