Art. No. ..5192KRMTSD
Art. No. ..5194KRMTSD
for single-room temperature control.
Controller extension 1
The Controller 2 function block works as
a controller extension. A controller
extension itself is not involved in the
temperature regulating process. With it,
the user can operate the single-room
controller, i.e. the main controller from
different places in the room. Any number
of controller extensions can be
controlled by a main controller. In the
function as a controller extension,
settings relating to the integrated
controller are not possible in the menu
level.
4.2.5.3.1 Room temperature controller
Description
Values
Comment
h
Room temperature control -> Controller general
Source, actual
temperature
The product database of the device
contains three independent blocks for
temperature measurement. Up to three
temperatures can be determined in
parallel, depending on whether the TSM
is alone, is combined with a TSEM
and/or with a connected remote sensor.
Each temperature measurement can be
performed by the internal sensor or,
optionally, by a received temperature
value. Combined temperature recording
(internal received temperature
value) can also be configured.
TSM
TSEM
Remote sensor
Object
This parameter defines with which
temperature values Controller
n
works.
For room temperature control,
temperature values can be measured
either by the TSM, TSEM or a remote
sensor or be received via a
communication object. The precondition
for control with temperature values from
the TSM, TSEM or remote sensor is that
the set source is enabled and configured
on the "Room temperature
measurement" parameter page. The
"Object" selection for the "Actual
temperature" communication object
enables which temperature values can
be received via the KNX.
Operating mode
Page 259 of 309
Software "Room controller display compact module 146x11"
Parameters
