Art. No. ..5192KRMTSD
Art. No. ..5194KRMTSD
4.2.5 Parameters
4.2.5.1 Parameter group "General"
Description
Values
Comment
h
General
No parameters are shown on this parameter page. The "Basic settings" parameter page is
subordinate to the "General" parameter page.
h
Basic settings
The "Menu level" parameter page is subordinate to the "Basic settings" parameter page.
Transmit delay after
reset or bus voltage
return
Yes
No
After a reset (e.g. after loading of an
application program or the physical
address or after return of bus voltage),
the push-button sensor can
automatically transmit telegrams for the
room temperature controller extension
functions. In case of the controller
extension, the push-button sensor
attempts to retrieve values from the
room temperature controller by means
of read telegrams in order to update the
object states. In case of the room
temperature measurement, the push-
button sensor transmits the current room
temperature after a reset to the bus.
If there are still other bus devices
besides the push-button sensor
transmitting telegrams immediately after
a reset, it may be useful to activate the
transmit delay for automatically
transmitting objects in order to reduce
the bus load.
When transmit delay is activated
(setting: "Yes"), the push-button sensor
computes the time delay from its device
ID in the physical address. The sensor
then waits 30 seconds maximum before
transmitting telegrams.
Push-button sensor
module (TSM / basic
unit)
4-gang
2-gang
This parameter adjusts the database to
the device being used. The compact
room controller module is available in
the 2-gang and 4-gang variants.
Extension module
(TSEM) connected?
Yes
No
If a push-button sensor extension
module is connected to the basic device,
it must be enabled at this point.
An extension module must only be
enabled if an extension module is
actually connected to the basic device.
Page 208 of 309
Software "Room controller display compact module 146x11"
Parameters
