Art. No. ..5192KRMTSD
Art. No. ..5194KRMTSD
4.2 Software "Room controller display compact module 146x11"
4.2.1 Scope of functions
General functions
-
The backlighting can be switched permanently on or off. It can be switched on with a
button-press, be switched on during night operation or be switched by a communication
object. The brightness of the background illumination can be set within the menu level or
optionally via a communication object.
-
Integrated scene control. Internal storage of up to eight scenes with eight output channels,
recall of internal scenes by means of a presettable scene number, selection of object types
for the output channels; for each scene, the storage of the individual output values and the
transmission of the output values can be permitted or inhibited; the individual channels can
be delayed during scene recall; as scene extension, 64 scenes can be recalled and stored.
-
Alarm signal. If the alarm message is activated, all the status LEDs flash red.
-
Push button lock. The designed scope of functions ranges from the disabling of all the
buttons, through the disabling of individual buttons up to the assignment of a special
disabling function behaviour of the buttons.
-
The number of control surfaces can be expanded using a push-button sensor extension
module.
Display functions
-
The backlighting can be switched permanently on or off. It can be switched on with a
button-press, be switched on during night operation or be switched by a communication
object. The brightness of the background illumination can be set within the menu level or
optionally via a communication object.
-
Display of a cycle of up to 17 display pages or activated directly via an object. Optionally,
the indication can also be switched by pressing a button on the device.
-
Display of a temperature optionally combined with the icons of one of the two controller
cycles. The following temperatures can be displayed: Actual temperature, setpoint
temperature, outdoor temperature, any temperature 1-3.
-
In the menu level, actual controller values, setpoint controller values, the controller status,
the controller operating mode or the fan levels can be displayed for both controller circuits.
-
Display of button function icons for visualisation of the button functions (only in the design
ranges LS and CD!).
-
Display of menu level
-
Programming mode is signalled by the text "Prog" on the display. If a valid application is
already loaded into the device and the device is set back into Programming mode,
Programming mode is signalled alternately by the text "Prog" and the displayed firmware
version (e.g. "A1.00") in the display.
-
The display shows the text "LOAd" during an active programming operation.
-
In the delivery state, the text "NEU" is shown in the display.
-
If the device does not contain an application program - or contains the wrong one - the text
"LEEr" appears.
Page 38 of 309
Software "Room controller display compact module 146x11"
Scope of functions
