Intel 80C186EA, User Manual

Page: 283 / 417

DIRECT MEMORY ACCESS UNIT
10-16
Figure 10-11. DMA Control Register (Continued)
Register Name: DMA Control Register
Register Mnemonic: DxCON
Register Function: Controls DMA channel parameters.
Bit
Mnemonic
Bit Name
Reset
State
Function
TC Terminal
Count X Set TC to terminate transfers on Terminal Count. This bit
is ignored for unsynchronized transfers (that is, the DMA
channel behaves as if TC is set, regardless of its
condition).
INT Interrupt X Set INT to generate an interrupt request on Terminal
Count. The TC bit must be set to generate an interrupt.
SYN1:0 Synchroni-
zation Type XX Selects channel synchronization:
SYN1 SYN0 Synchronization Type
0 0 Unsynchronized
0 1 Source-synchronized
1 0 Destination-synchronized
1 1 Reserved (do
not
use)
P Relative
Priority X Set P to select high priority for the channel; clear P to
select low priority for the channel.
IDRQ Internal
DMA
Request
Select X Set IDRQ to select internal DMA requests and ignore
the external DRQ pin. Clear IDRQ to select the DRQ pin
as the source of DMA requests. When IDRQ is set, the
channel must be configured for source-synchronized
transfers (SYN1:0 = 01).
NOTE: Reserved register bits are shown with gray shading. Reserved bits must be written to a
logic zero to ensure compatibility with future Intel products.
15 0
S
T
R
T
C
H
G
W
O
R
D
P S
Y
N
0
S
Y
N
1
I
D
R
Q
T
C
S
I
N
C
S
D
E
C I
N
T
D
I
N
C
D
D
E
C D
M
E
M
S
M
E
M
A1180-0A