Multitron - Operating Manual
Safety and Responsibility
Page
20
of
158
20 August 2020
2.10
Declaration of Decontamination
When returning the device for repair, disassembly or disposal, it is
required for the safety of all parties involved and because of legal
provisions that a lawful declaration of decontamination is present.
The following must be observed if this is the case:
The device, the component part or accessory must be entirely
decontaminated before sending to the manufacturer
The provider is therefore required to completely and truthfully
fill out a declaration of decontamination, and have it signed by
the person responsible.
The declaration of decontamination must be affixed on
the outer packaging in which the device is sent back.
These forms can be obtained from the licensed dealer or the
manufacturer. See address on page 2.
Important notice
If the return shipment is not accompanied by a signed and complete
declaration of decontamination or it is not affixed to the outer pack-
aging, the shipment will be returned unopened to the sender at their
expense (see also T&C).
