Multitron - Operating Manual
Operation
Page
88
of
158
20 August 2020
7.3.4
Operating Panel
The various keys on the operating panel serve to select and set the
parameters, timers and other functions and modes. On the panel
there are selection keys in orange (parameters, operator mode) and
in blue (timer function) as well as white keys for the setting.
The white keys for the setting exist twice because they are arranged
in an upper and a lower group within the operating key area which
corresponds with the according display area.
INFORMATION
The sensor controlled soft-touch keys are behind a glass cover and
they only need to be touched very gently.
INFORMATION
Tapping an arbitrary key on the operating panel turns on the light
inside the incubation chamber. 20 seconds after tapping the last
key it is automatically turned off.
Keys for selecting
With the
Select
key the parameters and functions are selected within
the timer function or the operator mode.
The symbol of the selected parameter or timer (
Time 1
or
Time 2
) is
displayed in the upper or lower display area.
With the
TIMER
key the timer function is selected. Afterwards, the
two timers can be programmed using the keys in the upper or lower
operating area.
On both display areas the symbols
Time 1
(upper area) und
Time 2
(lower area) are displayed
For detailed information see chapter 7.5 "Timer Function", page 95.
By holding the
OPTION
key for at least 2 seconds the operator mode
is selected. It allows to change the setup of the device.
The
OPTION
key is also used to select the functions within the opera-
tor mode.
For detailed information see chapter 7.7 "Settings Menu (Option
Function)", page 111.
