Multitron - Operating Manual
Transport and Storage
20 August 2020
Page
133
of
158
10
Transport and Storage
The inbound delivery and transport to the assembly location are per-
formed only by INFORS HT employees or by persons authorised by
INFORS HT.
Nonetheless it is possible that the provider’s personnel is entrusted
with transport tasks in the context of on-site transport. In this case,
observe the following notes.
10.1
Transport
WARNING
Improper transport, the use of incorrect auxiliary equipment and
careless handling of the device may lead to injuries and severe
property damage.
When transporting the device, observe the following:
Prior to moving the device, transport fasteners (rubber wedges)
must be inserted to prevent uncontrolled movements of the ta-
ble.
Always work in pairs and use suitable auxiliary equipment when
transporting the unit.
Especially when using auxiliary tools, it is important to keep in
mind that the device’s centre of gravity is not in the middle.
10.2
Storage
Decontaminate, thoroughly clean and dry the device every time
before placing it in storage. Maintain and store sensors pro-
duced by other manufacturers in accordance with their instruc-
tions.
Store the device and its components clean, dry and protected
against dust, dirt and liquids.
Store the device and its components in a cool place with low
humidity but protected against frost.
Storage temperature: 10 °C to 35 °C.
Relative humidity, non-condensing: 10 % to 85 %.
Protect the device from aggressive media, direct sunlight and
vibrations.
