Multitron - Operating Manual
Rectifying Faults
Page
118
of
158
20 August 2020
8
Rectifying Faults
The following section describes possible reasons for faults and how
to rectify them.
Fault messages
A distinction is made between alarms (
ALARM
) and error messages
(
ERROR
):
Alarms
refer to errors in the process, for example, when the
actual parameter values deviate from the setpoints. Alarms are
indicated with the warning symbol and an acoustic signal. The
alarm message can be confirmed by tapping any key. If an
alarm is not confirmed manually, it disappears as soon as the
condition, that has triggered the alarm, is not fulfilled any-
more.
Error messages
relate to technical faults in the device. The af-
fected functions are stopped automatically. Error messages are
indicated with the warning symbol and an acoustic signal. The
error can be confirmed by tapping the
Select
key.
Contact the manufacturer in case of faults that cannot be resolved by
following the instructions below. For service contact details, see page
2.
