Multitron - Operating Manual
Operation
20 August 2020
Page
111
of
158
7.7
Settings Menu (Option Function)
The settings menu enables you to adjust the main device settings. To
open the device’s settings menu, proceed as follows:
Procedure
1.
Tap the
OPTION
key for at least 2 seconds.
On the top display, the
OPt
message appears with the symbols
Setpoint
and
High.
The Settings menu is thus open and you can
make the desired settings.
Tapping the
OPTION
key again lets you switch to the next func-
tion. If no key is tapped for 60 seconds, the display returns to
normal operating mode. If all functions are clicked through, the
device also returns to normal operating mode.
INFORMATION
The limits for the allowed setpoints of the parameters can only be
set within a few factory-set values.
If the setpoint for a parameter is limited in the settings menu of
the device and an attempt is made to enter a higher value, the
bLoc
message appears.
The following chapters explain the individual functions.
7.7.1
Setting the Upper Limit for the Rotation Speed
Top display:
OPt
,
Setpoint
and
High
Bottom display:
RPM
The maximum rotation speed that can be entered as a setpoint can
be restricted. To do so, tap the
SET
key (the sign
Setpoint
appears)
and then use the
Plus
or
Minus
key to set the desired value.
