Multitron - Operating Manual
Maintenance and Cleaning
Page
128
of
158
20 August 2020
9
Maintenance and Cleaning
WARNING
To prevent life-threatening electric shocks, always switch off the
device and disconnect it from the power supply before carrying
out any maintenance or cleaning.
9.1
Maintenance
The device requires hardly any maintenance. This reduces the running
costs to certain regular checks and cleaning. The following table de-
scribes the maintenance work that is required to ensure optimum,
fault-free operation.
If increased wear is detected during the regular checks, the required
maintenance intervals must be reduced to suit with the actual signs
of wear. Keep in mind that various media or gases will have more or
less corrosive effects on the metal parts. When using particularly ag-
gressive substances, more frequent checks are required in order to
maintain smooth device operation.
Contact the manufacturer if you have any questions regarding
maintenance work or intervals; see Service contact details on page 2.
Interval
Maintenance work
To be carried out
by
Prior to each use Check hoses and power cable for damage; replace if necessary.
Operator
Check that hoses (water, CO
2
) are connected tightly.
Operator
Check all seals on the device, especially on the door, and replace if
necessary.
Qualified techni-
cians
Check whether the interior lighting works, have lamps replaced if nec-
essary.
Qualified techni-
cians
After each use
Clean the device, if necessary, disinfect thoroughly.
Operator
Annually
If you are using humidity and CO
2
sensors, have these calibrated at
least once a year to ensure measuring results remain accurate.
Qualified techni-
cians
