Multitron - Operating Manual
Safety and Responsibility
20 August 2020
Page
17
of
158
2.7.1
Danger due to Hot Surfaces
For applications that are performed with temperatures over 55 °C,
there is a danger of burns on hot surfaces in the interior or on the
cultivation vessels.
For applications with temperatures over 55 °C wear heat-re-
sistant protective gloves.
2.7.2
Dangerous Gases
The use or production of dangerous – i.e. toxic or asphyxiant – gases
entails a significant health risk, especially in enclosed spaces. To pre-
vent high emissions of dangerous gases, the following measures
must be taken:
When using CO
2
control or manufacturing dangerous gases, the
device must be set up in a well-ventilated area.
The gas connections on the device must be checked before any
cultivation processes using dangerous gases are initiated.
2.7.3
Flammable or Explosive Substances
The use or production of flammable or explosive substances is not
covered under “intended use” of the device, as the device is not ex-
plosion-proof.
If the provider intends to use the device for such purposes, he must
check its suitability for the planned application with the responsible
local authorities.
2.7.4
Corrosive or Toxic Substances
The use or production of corrosive or toxic substances entails a signif-
icant health risk. As such, special measures must be taken to protect
the users for such applications.
Since the device is used deliberately for such applications, it is the
responsibility of the users to ensure that they have sufficient protec-
tion.
