Multitron - Operating Manual
Operation
Page
116
of
158
20 August 2020
7.7.12
Humidity – Switch On/Off High Alarm
Top display:
OPt
and
ALARM
Bottom display:
Humid
and
High
The High alarm of the
Humidity
parameter can be switched on or off.
If the alarm is switched off, no alarm is triggered if the humidity ex-
ceeds the upper limit value. Since the humidity in the incubation
chamber is normally not a critical parameter that has a direct impact
on the success of the cultivation, the High alarm of the
Humidity
pa-
rameter is switched off ex factory.
To switch on or off the High alarm of the
Humidity
parameter, tap
the
SET
key (the sign
Setpoint
appears) and then use the
ON/OFF
key to activate or deactivate the alarm.
7.8
Setting the Adjustable Throw
INFORMATION
Improper modification of the throw of a device with an adjustable
throw represents a safety risk. The throw may therefore only be
changed by personnel that has received appropriate training and
authorisations. If you have any questions, contact your local IN-
FORS HT representative (see contact details on page 2).
