Multitron - Operating Manual
Rectifying Faults
20 August 2020
Page
127
of
158
8.3
Replacing Fuses
INFORMATION
The fuses may only be replaced by fuses of the same rating. For in-
formation concerning the requirements for the fuses see chapter
12.3 "Specifications of the Basic Unit", page 140.
To replace a defective fuse, proceed as follows:
Procedure
1.
Turn off the device and pull out the mains plug.
2.
Unlock the plug for the fuses by pressing together the two flaps
and pull out the plug at the same time.
3.
Remove the defective fuse.
4
. Insert a new fuse with the correct number of Amperes.
5.
Push the plug as far back in the opening as possible until it
snaps in.
6.
Re-establish the power supply to the device.
8.4
Returning for Repair
The provider must return the device or the faulty component part(s)
to the manufacturer if, after consulting the service department of the
local dealer or the manufacturer, on-site diagnosis and/or repair is
not possible.
INFORMATION
When returning the device, the component part or accessory for
repair, it is required for the safety of all parties involved and be-
cause of legal provisions that a lawful declaration of decontamina-
tion is present. Refer to main chapter “Safety and Responsibility”,
chapter “Declaration of Contamination” for details.
