Husqvarna F2203P4 Repair Manual Download Page 51

Page: 51 / 381

9.1

9.2

9 SHOCK ABSORBER, SWINGARM

Adjusting the high-s eed com�ression dam�ing of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will fly off if the shock absorber is disassembled incor

rectly.

The shock absorber is filled with highly compressed nitrogen.
-

Please follow the description provided.

Info

The effect of the high-speed setting can be seen in fast compression of the shock absorber.

- Turn adjusting screw

all the way clockwise with a socket

wrench.

•

Info

Do not loosen fitting

- Turn counterclockwise by the number of turns corresponding

to the shock absorber type.
Guideline

Compression damping, high-speed

Comfort
Standard

Sport

•

Info

2.5 turns
2 turns

1.5 turns

Turn clockwise to increase damping; turn counter
clockwise to reduce damping.

Adjusting the low-speed compression damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will fly off if the shock absorber is disassembled incor

rectly.

The shock absorber is filled with highly compressed nitrogen.
-

Please follow the description provided.

Info

The effect of the low-speed setting can be seen in slow to normal compression of the shock absorber.

Summary of Contents for F2203P4






























































































































































































































































































































































































Search results

Summary of Contents for F2203P4

Reviews:

Related manuals for F2203P4

Brands by name

Popular brands

Husqvarna F2203P4, Repair Manual

Search results

Summary of Contents for F2203P4

Reviews:

Related manuals for F2203P4

Brands by name

Popular brands