
18 ENGINE
18.5.32 Installing the oil filter
18.5.33 Installing the oil screen
250
- Tilt the motorcycle to one side and fill the oil filter housing to
about ½ full with engine oil.
- Insert oil filter
O
into the oil filter housing.
- Oil the O-ring of the oil filter cover.
- Mount oil filter cover
8.
- Mount and tighten screws
fD.
Guideline
I
Screw, oil filter cover
I
M6
110 Nm (7.4 lbf ft}
..
- Mount and tighten the oil drain plug
O
with the magnet and
the new seal ring.
Guideline
Oil drain plug with
magnet
M12x1.5
20 Nm (14.8 lbf ft}
- Push the oil screen with O-rings onto a pin wrench.
- Push the pin wrench through the opening into the drill hole of
the opposite engine case wall and push the oil screen as far
as possible into the engine case.
- Mount and tighten screw plug
8
with the O-ring.
Guideline
Screw plug, oil
screen
M20x1.5
15 Nm (11 .1 lbf ft}
..
Summary of Contents for F2203P4
Page 2: ......
Page 293: ...29 SERVICE SCHEDULE 291 ...