HP MSR SERIES, Configuration Manual

Page: 659 / 889

642
Configuring caller identity and privacy
Select Voice Management > Call Connection > SIP Connection from the navigation tree, and click the
Session Properties tab to access the caller identity and privacy configuration page, as shown in Figure
664 .
Figure 664 Caller identity and privacy configuration page
Table 246 Configuration items
Item Description
Caller Identity
Presentation Restriction
Mode
•
None —Neither the P-Preferred-Identity header field nor the P-Asserted-Identity
header field is added.
•
P-Assented-Identity —Add the P-Asserted-Identity header field. The Privacy
header field indicates whether caller identity presentation is enabled or not, and
the P-Asserted-Identity header field contains the caller’s number.
•
P-Preferred-Identity —Add the P-Preferred-Identity header field. The Privacy
header field indicates whether caller identity presentation is enabled or not, and
the P-Asserted-Identity header field contains the caller's number.
The default setting is None , that is, caller identity presentation is enabled.
Add the Remote-Party-ID
Header Field
•
Enable —Add the Remote-Party-ID header field.
•
Disable —Remove the Remote-Party-ID header field.
By default, the Remote-Party-ID header field is not added.
Caller ID presentation can be disabled by adding the P-Preferred-Identity, P-Asserted-Identity, or
Remote-Party-ID header field.
•
When the P-Preferred-Identity or P-Asserted-Identity header field is added, the Privacy header field
will be added. When the Privacy header field is set to
none , caller identity presentation is allowed.
When the Privacy header field is set to id , caller identity presentation is restricted.
•
Remote-Party-ID header field: privacy=off indicates caller identity presentation and privacy=full
indicates caller identity screening. The calling information can be transparently transmitted by
adding the Remote-Party-ID header field.
The Remote-Party-ID header field can be used together with the P-Preferred-Identity header field or
P-Asserted-Identity header field. If so, the Remote-Party-ID header field takes precedence over the
P-Preferred-Identity header field or the P-Asserted-Identity header field.