HP MSR SERIES, Configuration Manual

Page: 182 / 889

165
Figure 164 Network diagram
Configuration procedure
# Configure IP addresses for the interfaces. (Details not shown.)
# Enable the blacklist function.
• Select Security Setup > Attack Defend > Blacklist from the navigation tree, and then perform the
following configurations, as shown in Figure 165 .
Figure 165 Enabling the blacklist function
• Select the box before Enable Blacklist .
• Click Apply .
# Add blacklist entries manually.
•
Click Add and then perform the following configurations, as shown in Figure 166 :
Figure 166 Adding a blacklist entry for Host D