manualshive.com logo in svg

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch, Reference Manual

The HP 438031-B21 - 1:10Gb Ethernet BL-c Switch is a versatile networking device that offers reliable and high-speed connectivity. To fully take advantage of its features, make sure to download the comprehensive Command Reference Manual from our website manualshive.com for free. This manual provides detailed instructions and troubleshooting tips to optimize your experience with this product.

Share
Download
background image

 

 

 

Viewing statistics

 

 

 

  

 

131

 

Table 91 

 ICMP statistics 

 

Statistics Description 

icmpInParmProbs 

The number of ICMP Parameter Problem messages received. 

icmpInSrcQuenchs 

The number of ICMP Source Quench (buffer almost full, stop sending data) 

messages received. 

icmpInRedirects 

The number of ICMP Redirect messages received. 

icmpInEchos 

The number of ICMP Echo (request) messages received. 

icmpInEchoReps 

The number of ICMP Echo Reply messages received. 

icmpInTimestamps 

The number of ICMP Timestamp (request) messages received. 

icmpInTimestampReps 

The number of ICMP Timestamp Reply messages received. 

icmpInAddrMasks 

The number of ICMP Address Mask Request messages received. 

icmpInAddrMaskReps 

The number of ICMP Address Mask Reply messages received. 

icmpOutMsgs 

The total number of ICMP messages which this switch attempted to send. Note that 

this counter includes all those counted by icmpOutErrors. 

icmpOutErrors 

The number of ICMP messages that this switch did not send due to problems 
discovered within ICMP such as a lack of buffer. This value should not include 

errors discovered outside the ICMP layer such as the inability of IP to route the 
resultant datagram. In some implementations there may be no types of errors that 

contribute to this counter's value. 

icmpOutDestUnreachs 

The number of ICMP Destination Unreachable messages sent. 

icmpOutTimeExcds 

The number of ICMP Time Exceeded messages sent. 

icmpOutParmProbs 

The number of ICMP Parameter Problem messages sent. 

icmpOutSrcQuenchs 

The number of ICMP Source Quench (buffer almost full, stop sending data) 

messages sent. 

icmpOutRedirects 

The number of ICMP Redirect messages sent. 

icmpOutEchos 

The number of ICMP Echo (request) messages sent. 

icmpOutEchoReps 

The number of ICMP Echo Reply messages sent. 

icmpOutTimestamps The 

number of ICMP Timestamp (request) messages sent. 

icmpOutTimestampReps 

The number of ICMP Timestamp Reply messages sent. 

icmpOutAddrMasks 

The number of ICMP Address Mask Request messages sent. 

icmpOutAddrMaskReps 

The number of ICMP Address Mask Reply messages sent. 

 

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch





























































































































































































































































Reviews:

No comments

Related manuals for 438031-B21 - 1:10Gb Ethernet BL-c Switch

H3C S12500X-AF Series User Manual preview
S12500X-AF Series
Brand: H3C Pages: 3
Linksys WUSBF54G Product Data preview
WUSBF54G
Brand: Linksys Pages: 2
Emulex NC551i Datasheet preview
NC551i
Brand: Emulex Pages: 2
HQ EL-ES04HQ Manual preview
EL-ES04HQ
Brand: HQ Pages: 37
AmazonBasics B072FS6SRM Manual preview
B072FS6SRM
Brand: AmazonBasics Pages: 52
Shimano SM-MA-F140P/D Dealer'S Manual preview
SM-MA-F140P/D
Brand: Shimano Pages: 24
Digitus DA-70148-3 User Manual preview
DA-70148-3
Brand: Digitus Pages: 10
UCONNECT INTERNATIONAL BT-232B User Manual preview
BT-232B
Brand: UCONNECT INTERNATIONAL Pages: 8
Air Live SKY-211 Quick Setup Manual preview
SKY-211
Brand: Air Live Pages: 50
Ovislink HP-1000E v2 User Manual preview
HP-1000E v2
Brand: Ovislink Pages: 13
BeeWi BWA211 User Manual preview
BWA211
Brand: BeeWi Pages: 73
Goobay 62104 User Manual preview
62104
Brand: Goobay Pages: 5
IBM Remote Supervisor Adapter User Manual preview
Remote Supervisor Adapter
Brand: IBM Pages: 124
Parker PSSCDM12A User Manual preview
PSSCDM12A
Brand: Parker Pages: 52
Air Live AirLive HP-3000E Quick Setup Manual preview
AirLive HP-3000E
Brand: Air Live Pages: 39
TP-Link TL-WN951N - IEEE 802.11b/g 802.11n Draft 2.0 PCI Wireless Adapter User Manual preview
TL-WN951N - IEEE 802.11b/g 802.11n Draft 2.0 PCI Wireless Adapter
Brand: TP-Link Pages: 41
V7 UCWDA User Manual preview
UCWDA
Brand: V7 Pages: 23
Planet WL-U356A Quick Installation Manual preview
WL-U356A
Brand: Planet Pages: 2

Brands by name

Popular brands

Load more brands