HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual Download

Page: 140 / 252

Configuring the switch

140

The following table describes the Switch Management Processor Configuration (basic) controls:

Table 95

Switch Management Processor Configuration (Basic) controls

Control Description

Switch IP Address

Configures the IP address of the switch interface using dotted decimal

notation.

Switch IP Subnet Mask

Configures the IP subnet address mask for the interface using dotted
decimal notation.

Enable/Disable BOOTP for IP

Management

Enables or disables the use of

BOOTP

. If you enable

BOOTP

, the switch will

query its

BOOTP

server for all of the switch IP parameters. This command is

enabled by default.

Enable/Disable DHCP for

Management Interface

Enables or disables Dynamic Host Control Protocol for setting the

management IP address.

Enable/Disable Console output of
syslog messages

Enables or disables delivering syslog messages to the console. When
necessary, disabling console ensures the switch is not affected by syslog

messages. It is enabled by default.

Enable/Disable Host Name

Enables or disables displaying of the host name (system administrator’s
name) in the Command Line Interface (CLI).

Syslog Host IP Address

Sets the IP address of the first syslog host.

Severity of Syslog Host

This option sets the severity level of the first syslog host displayed. The
default is 7, which means log all the seven severity levels.

Facility of Syslog Host

This option sets the facility level of the first syslog host displayed. The

default is 0.

Second Syslog Host IP Address

Sets the IP address of the second syslog host.

Severity of Second Syslog Host

This option sets the severity level of the second syslog host displayed. The

default is 7, which means, log all seven severity levels.

Facility of Second Syslog Host

This option sets the facility level of the second syslog host displayed. The
default is 0.

Current Date

Configures the system date.

Current Time

Configures the system time using a 24-hour clock format.

Displays login notice immediately before the “Enter password:” prompt in
the Command Line Interface (CLI). This notice can contain up to 1024

characters and new lines.

Banner

Configures a login banner of up to 80 characters. When a user or
administrator logs into the switch Command Line Interface (CLI), the login

banner is displayed.
It is also displayed as part of the output from the

/info/sys/gen

command.

Telnet Port (1-65535)

Sets an optional telnet server port number for cases where the server listens

for telnet sessions on a non-standard port. The default is 23.

TFTP Port (1-65535)

Sets an optional TFTP server port number for cases where the server listens
for TFTP sessions on a non-standard port. The default is 69.

Idle Timeout (1-60)

Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default is 5
minutes.

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch





























































































































































































































































Search results

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch

Reviews:

Related manuals for 438031-B21 - 1:10Gb Ethernet BL-c Switch

Brands by name

Popular brands

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch, Reference Manual

Search results

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch

Reviews:

Related manuals for 438031-B21 - 1:10Gb Ethernet BL-c Switch

Brands by name

Popular brands