Configuring the switch
145
Switch RADIUS Configuration
To display the following form, select
System > Radius.
The following table describes Switch Radius Configuration controls:
Table 99
Switch RADIUS Configuration controls
Control Description
Primary Radius IP Address
Configures the primary Radius server address.
Secondary Radius IP Address
Configures the secondary Radius server address.
Radius port (1500-3000)
Configures the number of the UDP port to be configured, between 1500
and 3000. The default is 1645.
Radius timeout (1-10)
Configures the amount of time, in seconds, before a Radius server
authentication attempt is considered to have failed. The default is
3 seconds.
Radius retries (1-3)
Configures the number of failed authentication requests before switching
to a different Radius server. The default is 3 requests.
Enable/Disable Radius Server
Enables or disables the Radius server.
Enable/Disable Radius Backdoor for
telnet/ssh/http/https
Enables or disables the RADIUS backdoor for telnet/SSH/SCP/
HTTP/HTTPS connections.
Enable/Disable Radius Secure Backdoor
for telnet
Enables or disables the RADIUS back door using secure password for
telnet.
