manualshive.com logo in svg

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch, Reference Manual

The HP 438031-B21 - 1:10Gb Ethernet BL-c Switch is a versatile networking device that offers reliable and high-speed connectivity. To fully take advantage of its features, make sure to download the comprehensive Command Reference Manual from our website manualshive.com for free. This manual provides detailed instructions and troubleshooting tips to optimize your experience with this product.

Share
Download
background image

 

 

 

Viewing statistics

 

 

 

  

 

89

 

To display the following form, go to the Management Processor Statistics form. Select 

UDP Stats

 or 

SNMP Stats,

 and scroll down.  

 

SNMP statistics are described in the following table: 

Table 56 

 SNMP Statistics 

 

Statistic Description 

snmpInPkts 

The total number of Messages delivered to the SNMP entity from the transport 

service. 

snmpOutPkts 

The total number of SNMP Messages that were passed from the SNMP protocol 
entity to the transport service. 

snmpInTooBigs 

The total number of SNMP Protocol Data Units (PDUs) that were delivered to the 

SNMP protocol entity and for which the value of the error-status field is too big. 

snmpOutTooBigs 

The total number of SNMP Protocol Data Units (PDUs), which were generated by the 
SNMP protocol entity and for which the value of the error-status field is too big. 

snmpInGetRequest 

The total number of SNMP Get-Request Protocol Data Units (PDUs), which have been 

accepted and processed by the SNMP protocol entity. 

snmpOutGetRequests 

The total number of SNMP Get-Request Protocol Data Units (PDUs), which have been 
generated by the SNMP protocol entity. 

snmpInNoSuchNames 

The total number of SNMP Protocol Data Units (PDUs) that were delivered to the 
SNMP protocol entity and for which the value of the error-status field is 

noSuchName. 

snmpOutNoSuchNames 

The total number of SNMP Protocol Data Units (PDUs), which were generated by the 
SNMP protocol entity and for which the value of the error-status is noSuchName. 

snmpInGetNexts 

The total number of SNMP Get-Next Protocol Data Units (PDUs), which have been 

accepted and processed by the SNMP protocol entity. 

snmpOutGetNexts 

The total number of SNMP Get-Next Protocol Data Units (PDUs), which have been 
generated by the SNMP protocol entity. 

snmpInBadValues 

The total number of SNMP Protocol Data Units (PDUs) that were delivered to the 
SNMP protocol entity and for which the value of the error-status field is badValue. 

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch





























































































































































































































































Reviews:

No comments

Related manuals for 438031-B21 - 1:10Gb Ethernet BL-c Switch

FastTt Aeria Evo Installation Manual preview
Aeria Evo
Brand: FastTt Pages: 5
StarTech.com EXR8STICUSB2321FIS Manual preview
EXR8STICUSB2321FIS
Brand: StarTech.com Pages: 11
AGFEO HS-Module 30 Installation Instructions Manual preview
HS-Module 30
Brand: AGFEO Pages: 12
Accutone AU300 Install Manual & User Manual preview
AU300
Brand: Accutone Pages: 8
StarTech.com PCI220USB Instruction Manual preview
PCI220USB
Brand: StarTech.com Pages: 10
Bernafon Phone Adapter Installation Manual preview
Phone Adapter
Brand: Bernafon Pages: 20
ATTO Technology FibreBridge 2400C Specification Sheet preview
FibreBridge 2400C
Brand: ATTO Technology Pages: 2
ZyXEL Communications ZyAIR G-405 User Manual preview
ZyAIR G-405
Brand: ZyXEL Communications Pages: 99
Macpower & Tytech D7-3500 User Manual preview
D7-3500
Brand: Macpower & Tytech Pages: 26
Belkin F5D7050ceE User Manual preview
F5D7050ceE
Brand: Belkin Pages: 25
Silvercrest Adaptor Set User Manual And Service Information preview
Adaptor Set
Brand: Silvercrest Pages: 13
Kensington 33051 User Manual preview
33051
Brand: Kensington Pages: 7
RCA AH57R User Manual preview
AH57R
Brand: RCA Pages: 2
Sony CNA-1 Technical Manual preview
CNA-1
Brand: Sony Pages: 40
Tripp Lite U444-T6N-H4GUBC Owner'S Manual preview
U444-T6N-H4GUBC
Brand: Tripp Lite Pages: 8
Tripp Lite U444-3DP-MST Quick Start Manual preview
U444-3DP-MST
Brand: Tripp Lite Pages: 8
Tripp Lite U444-06N-V-C Owner'S Manual preview
U444-06N-V-C
Brand: Tripp Lite Pages: 29
Tripp Lite U444-06N-H4-C Owner'S Manual preview
U444-06N-H4-C
Brand: Tripp Lite Pages: 37

Brands by name

Popular brands

Load more brands