manualshive.com logo in svg

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch, Reference Manual

The HP 438031-B21 - 1:10Gb Ethernet BL-c Switch is a versatile networking device that offers reliable and high-speed connectivity. To fully take advantage of its features, make sure to download the comprehensive Command Reference Manual from our website manualshive.com for free. This manual provides detailed instructions and troubleshooting tips to optimize your experience with this product.

Share
Download
background image

 

 

 

Viewing statistics

 

 

 

  

 

117

 

Table 81 

 OSPF General Statistics 

 

Statistic Description 

exchange done 

The sum total number of neighbors in this state (that is, in an adjacency's final state) 

having transmitted a full sequence of Database Description packets, across all OSPF 

areas and interfaces. 

bad requests 

The sum total number of Link State Requests which have been received for a link state 
advertisement not contained in the database across all interfaces and OSPF areas. 

bad sequence 

The sum total number of Database Description packets which have been received that 

either: 

•

 

Has an unexpected DD sequence number 

•

 

Unexpectedly has the init bit set 

•

 

Has an options field differing from the last Options field received in a Database 
Description packet. 

Any of these conditions indicate that some error has occurred during adjacency 

establishment for all OSPF areas and interfaces. 

loading done 

The sum total number of link state updates received for all out-of-date portions of the 
database across all OSPF areas and interfaces. 

n1way 

The sum total number of Hello packets received from neighbors, in which this router is 

not mentioned across all OSPF interfaces and areas. 

rst_ad 

The sum total number of times the Neighbor adjacency has been reset across all OPSF 
areas and interfaces. 

down 

The total number of Neighboring routers down (that is, in the initial state of a neighbor 

conversation) across all OSPF areas and interfaces. 

OSPF Interface 
Change Statistics

 

 

hello 

The sum total number of Hello packets sent on all interfaces and areas. 

down 

The sum total number of interfaces down in all OSPF areas. 

loop 

The sum total of interfaces no longer connected to the attached network across all OSPF 
areas and interfaces. 

unloop 

The sum total number of interfaces, connected to the attached network in all OSPF 

areas. 

wait timer 

The sum total number of times the Wait Timer has been fired, indicating the end of the 
waiting period that is required before electing a (Backup) Designated Router across all 

OSPF areas and interfaces. 

backup 

The sum total number of Backup Designated Routers on the attached network for all 

OSPF areas and interfaces. 

nbr change 

The sum total number of changes in the set of bidirectional neighbors associated with 
any interface across all OSPF areas. 

 

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch





























































































































































































































































Reviews:

No comments

Related manuals for 438031-B21 - 1:10Gb Ethernet BL-c Switch

Aiphone GHW-LC Installation And Operation Manual preview
GHW-LC
Brand: Aiphone Pages: 12
Gira 0582 00 Installation Instructions preview
0582 00
Brand: Gira Pages: 2
Patton electronics Smart-DTA Getting Started Manual preview
Smart-DTA
Brand: Patton electronics Pages: 57
Conrad 97 37 86 Operating Instructions preview
97 37 86
Brand: Conrad Pages: 4
Sena ProBee-ZU10 User Manual preview
ProBee-ZU10
Brand: Sena Pages: 67
Velleman PCUSBHDMI User Manual preview
PCUSBHDMI
Brand: Velleman Pages: 30
CP TECHNOLOGIES LevelOne WUA-0616 Quick Installation Manual preview
LevelOne WUA-0616
Brand: CP TECHNOLOGIES Pages: 5
TP-Link PG1200 User Manual preview
PG1200
Brand: TP-Link Pages: 18
Panduit PN260 Installation Instructions preview
PN260
Brand: Panduit Pages: 1
Proware M-WN910N User Manual preview
M-WN910N
Brand: Proware Pages: 39
Asante FriendlyNET 595 Adapter User Manual preview
FriendlyNET 595 Adapter
Brand: Asante Pages: 2
Lanpro LP-570G Installation Manual preview
LP-570G
Brand: Lanpro Pages: 16
Protectowire APL-90 Quick Start Manual preview
APL-90
Brand: Protectowire Pages: 2
OBDLink MX Wi-Fi Quick Start Manual preview
MX Wi-Fi
Brand: OBDLink Pages: 12
SIIG USB 2.0 to VGA Pro Installation Manual preview
USB 2.0 to VGA Pro
Brand: SIIG Pages: 16
Sigtronics 900118 Installation Instructions preview
900118
Brand: Sigtronics Pages: 5
Silicon Laboratories TOOLSTICK C8051F330 Manual preview
TOOLSTICK C8051F330
Brand: Silicon Laboratories Pages: 214
ADTRAN ISU 128 User Manual preview
ISU 128
Brand: ADTRAN Pages: 152

Brands by name

Popular brands

Load more brands