GIRA
Info
Instabus Backbone- / Line Coupler
Installation Instructions
Instabus Backbone- / Line Coupler
12/96
Page 1 of 2
Instabus Backbone- / Line Coupler
Order No.: 0582 00
Function
This device is a product of the
instabus
EIB-system and complies with EIBA directives. Detailed
technical knowledge obtained in
instabus
training courses is a prerequisite for proper understanding.
Functionality of this device is depending on the software and on the physical address.
Detailed information on loadable software and attainable functionality may be taken from the
manufacturer’s product database.
The Backbone- / Line Coupler allows for filtering
instabus
EIB telegrams between two
instabus
EIB
backbones/lines.
Each backbone and each line needs ist own power supply.
LED
•
green,
c
= appropriate operation
•
yellow,
d
= telegram transmission to secondary line
•
yellow,
e
= telegram transmission to higher line/backbone
Installation
Caution! The installation and assembly of electrical equipment may be carried out only by a
skilled person.
Planning, installation and commissioning of the unit is done by means of EIBA certified software.
The secondary line is connected to the data rail
f
, the higher line and/or the backbone to the
connecting and branch terminal
g
.
To apply the physical address the programming key
h
must be actuated. The red LED
i
lights up
and goes out when the physical address has been taken over.
The Backbone/Line coupler is to be allocated to the secondary line.
c
d
e
f
g
h i
