Configuring the switch
183
LACP Configuration
To display the following form, select
Layer 2 > LACP.
The following table describes the Switch LACP Configuration controls:
Table 124
Switch LACP Configuration controls
Control Description
LACP System Priority (1-65535)
Defines the priority value (1 through 65535) for the switch. Lower numbers
provide higher priority. The default value is 32768.
Timeout time
Defines the timeout period before invalidating LACP data from a remote
partner. Choose
short
(3 seconds) or
long
(90 seconds). The default value is
long.
NOTE:
HP recommends that you use a timeout value of
long
, to reduce
LACPDU processing. If your switch’s CPU utilization rate remains at 100% for
periods of 90 seconds or more, consider using static trunks instead of LACP.
