Configuring the switch
184
LACP Port Configuration
To display the following form, go to the Switch LACP Configuration form. Select a port number.
The following table describes the LACP Port Configuration controls:
Table 125
LACP Port Configuration controls
Control Description
Port Admin Key
Set the admin key for this port. Only ports with the same admin key and oper key
(operational state generated internally) can form a LACP trunk group.
Port Priority
Sets the priority value for the selected port. Lower numbers provide higher priority.
Default is 128.
Port LACP Mode
Set the LACP mode for this port, as follows:
•
off:
Turn LACP off for this port. You can use this port to manually configure a
static trunk. The default value is off.
•
active:
Turn LACP on and set this port to active. Active ports initiate
LACPDUs.
•
passive:
Turn LACP on and set this port to passive. Passive ports do not
initiate LACPDUs, but respond to LACPDUs from active ports.
