manualshive.com logo in svg

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch, Reference Manual

The HP 438031-B21 - 1:10Gb Ethernet BL-c Switch is a versatile networking device that offers reliable and high-speed connectivity. To fully take advantage of its features, make sure to download the comprehensive Command Reference Manual from our website manualshive.com for free. This manual provides detailed instructions and troubleshooting tips to optimize your experience with this product.

Share
Download
background image

 

 

 

Viewing statistics

 

 

 

  

 

105

 

 

NOTE:

 Currently, LACP implementation does not support the Churn machine, an option used to 

detect if the port is operable within a bounded time period between the actor and the partner. Only 
the Marker Responder is implemented, and there is no marker protocol generator.  

IP Statistics 

To display the following form, select 

Layer 3 > IP Interfaces 

(click the underlined text, not the folder). 

 

The following table describes IP statistics: 

Table 70 

 IP Statistics 

 

Statistic Description 

ipInReceives 

The total number of input datagrams received from interfaces, including those received in 

error. 

ipInAddrErrors 

The number of input datagrams discarded because the IP address in their IP header’s 
destination field was not a valid address to be received at this entity (the switch). This 

count includes invalid addresses (for example, 0.0.0.0) and addresses of unsupported 

Classes (for example, Class E). For entities which are not IP Gateways and therefore do 

not forward datagrams, this counter includes datagrams discarded because the 
destination address was not a local address. 

ipInUnknownProtos 

The number of locally addressed datagrams received successfully but discarded because 

of an unknown or unsupported protocol. 

ipInDelivers 

The total number of input datagrams successfully delivered to IP user protocols (including 
ICMP). 

ipOutDiscards 

The number of output IP datagrams for which no problem was encountered to prevent 
their transmission to their destination, but which were discarded (for example, for lack of 

buffer space). Note that this counter would include datagrams counted in 

ipForwDatagrams if any such packets met this (discretionary) discard criterion. 

ipInHdrErrors 

The number of input datagrams discarded due to errors in their IP headers, including bad 
checksums, version number mismatch, other format errors, time-to-live exceeded, errors 

discovered in processing their IP options, and so forth. 

ipInDiscards 

The number of input IP datagrams for which no problems were encountered to prevent 
their continued processing, but which were discarded (for example, for lack of buffer 

space). Note that this counter does not include any datagrams discarded while awaiting 
re-assembly. 

Summary of Contents for 438031-B21 - 1:10Gb Ethernet BL-c Switch





























































































































































































































































Reviews:

No comments

Related manuals for 438031-B21 - 1:10Gb Ethernet BL-c Switch

Baby Jogger Pram Instructions Manual preview
Pram
Brand: Baby Jogger Pages: 12
Telex HB-3+ Quick Start Manual preview
HB-3+
Brand: Telex Pages: 6
AES 77-FACPA Quick Start Manual preview
77-FACPA
Brand: AES Pages: 2
Yealink Expansion PSTN Box CPN10 Quick Start Manual preview
Expansion PSTN Box CPN10
Brand: Yealink Pages: 8
StarTech.com USB32VGAPRO User Manual preview
USB32VGAPRO
Brand: StarTech.com Pages: 15
Rosewill RNX-G300EX Quick Installation Manual preview
RNX-G300EX
Brand: Rosewill Pages: 12
Jabra Link 950 USB-A Quick Start Manual preview
Link 950 USB-A
Brand: Jabra Pages: 2
TRENDnet TE-16PTplus Specifications preview
TE-16PTplus
Brand: TRENDnet Pages: 2
Eaton TRIPP LITE U444-06N-DP4K6B Installation Instructions preview
TRIPP LITE U444-06N-DP4K6B
Brand: Eaton Pages: 4
3idee smsng-sa350 Assembly Instructions Manual preview
smsng-sa350
Brand: 3idee Pages: 7
nedis BTMA100BK Quick Start Manual preview
BTMA100BK
Brand: nedis Pages: 2
HandyWave HandyPort-Serial HPS-120 User Manual preview
HandyPort-Serial HPS-120
Brand: HandyWave Pages: 11
Belkin F5D8073 User Manual preview
F5D8073
Brand: Belkin Pages: 44
D-Link DHD-131 Brochure & Specs preview
DHD-131
Brand: D-Link Pages: 2
D-Link DHP-312 Quick Installation Manual preview
DHP-312
Brand: D-Link Pages: 24
D-Link DHP-306AV User Manual preview
DHP-306AV
Brand: D-Link Pages: 82
D-Link DHP-209AV User Manual preview
DHP-209AV
Brand: D-Link Pages: 23
D-Link DHP-303 - PowerLine HD EN Starter User Manual preview
DHP-303 - PowerLine HD EN Starter
Brand: D-Link Pages: 29

Brands by name

Popular brands

Load more brands