Honeywell HRSD16, User Manual

Page: 99 / 176

Configuration
Document 800-03650 Rev D 99
02/09
2. Select the cameras that you want the DVR to record when text input is detected.
If the DVR detects text input on the selected text-in device, it starts recording video
from all the associated cameras.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Setting Alarm-Out Actions
You can associate Alarm-Outs with the Text Inputs. When the DVR detects text input on
the selected text-in device, it triggers output signals on the associated Alarm-Out
connectors. You can also have the DVR internal buzzer sound if text-input is detected.
1. Highlight the desired field under the Alarm-Out heading, and press . A list of
Alarm Outputs appears.
2. Select the Alarm Output connectors that you would like to activate whenever the
DVR detects text input.
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Setting Text-In Notifications
1. Highlight the desired field under the Notify heading, and press . The Text-In
Notify menu appears.
2. You can toggle the entire list On and Off by highlighting Notification and
pressing .
You can toggle the individual items On and Off by highlighting them and pressing
.
3. Highlight OK and press to accept your changes.
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RASplus (Remote Administration System).