Honeywell HRSD16, User Manual

Page: 59 / 176

Configuration
Document 800-03650 Rev D 59
02/09
Note The DVR name you entered should be checked by
selecting Check, otherwise the DVRNS changes will not
be saved.
An error message displays if you don’t enter a name or if
you enter a name that is already registered on the
DVRNS server.
Highlight Save and press to register the DVR on the DVRNS server. Proper DVRNS
settings display the help desk information of the DVRNS server in the box beside Help
Desk.
WebGuard Setup
To set up WebGuard:
1. Highlight the WebGuard tab. The WebGuard screen displays.
Figure 3-30 WebGuard Screen
2. Highlight Use WebGuard Service, and press to toggle between On and Off.
See Appendix D, WebGuard for detailed descriptions of the WebGuard service.
3. Highlight the box beside Port and press . Set the port number used when
accessing WebGuard by using the Up and Down arrows to increase or decrease
the numbers.
4. Highlight Save and press to save your Network changes. Select Cancel to
exit the screen without saving your changes.