Honeywell HRSD16 User Manual Download Page 122

Page: 122 / 176

Operation

122

Using the Mouse for Playback

You can use a mouse for convenient playback control. Position the mouse pointer on
the playback screen, and the following playback toolbar appears.

Figure 4-10

Playback Toolbar

The individual controls on the toolbar perform the following functions:

ZOOM

Press ZOOM to enlarge the current image on the screen. Use the
arrows to navigate.

DISPLAY/SPOT

Press DISPLAY/SPOT to toggle different display formats. The
available formats are: 2x2, 3x3 and 4x4.

Press and hold the DISPLAY/SPOT button for two seconds or longer
to select which cameras display on the Spot monitor.

GROUP

Press the GROUP button changes the screen from the current
camera group to the next camera group, and the screen displays
page number.

Table 4-6

Playback Button Functions

Button

Function

Table 4-7

Playback Toolbar Functions

Go to the first image

Fast backward play

Go to the previous image

Play

Go to the next image

Fast forward play

Go to the last image

Exit the toolbar

Click the empty space under and drag the toolbar to where you want it located.

To re-display the toolbar, position the mouse pointer at the bottom of the screen.

Summary of Contents for HRSD16

















































































































































































Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands

Honeywell HRSD16, User Manual

Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands