Honeywell HRSD16 User Manual Download Page 39

Page: 39 / 176

Configuration

Document 800-03650

Rev D

02/09

Importing Saved DVR Settings

Connect the USB device containing the setup file

.dat

to the DVR.

Highlight Setup - Import… in the Information screen and press

. The Setup

Import screen appears.

Figure 3-7

Setup Import Screen

Select the desired setup file and press Import to import the selected settings and
change the DVR settings accordingly.

Highlight Include Network Setup and press

to toggle between On and Off.

When set to Off, the network settings will not be changed.

Select Import and press

Exporting Current DVR Settings

Connect the USB device to the DVR.

Highlight Setup - Export… in the Information screen and press

. The Setup

Export screen appears.

Figure 3-8

Setup Export Screen

Highlight the field beside File name and press

. A virtual keyboard appears to

allow you to enter the file name.

Select Export to save the current settings in

.dat

file format on the USB device.

Note

Even after changing the DVR settings by importing saved
settings, the time-related settings (Date/Time, Time Zone and
Daylight Saving Time) do NOT change.

Summary of Contents for HRSD16

















































































































































































Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands

Honeywell HRSD16, User Manual

Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands