Honeywell HRSD16, User Manual

Page: 50 / 176

Configuration
50
Adding a User
1. Highlight the + User… field and press . A virtual keyboard appears where you
can enter the User Name.
Figure 3-19 New User Setup Screen
2. Enter the new user’s name by highlighting and selecting a group, and then
selecting OK.
3. Assign the User to a Group.
4. Assign a password to the User. You can use camera buttons 1 to 9 on the front
panel or the virtual keyboard to assign the password. The password can be up to
8 digits.
5. Confirm the password.
6. Select OK and press .
Setup The user without Setup authority cannot establish any system settings
excluding system shutdown and logout on a local system or a PC running
RASplus.
Color Control The user can control brightness, contrast, hue, and saturation for cameras
on a local system or a PC running RASplus.
PTZ Control The user can control the PTZ camera on a local system or a PC running
RASplus.
Alarm-Out Control The user can reset the DVR outputs including the internal buzzer that plays
during an alarm by pressing the ALARM button on a local system or
alarm-out control button on a PC running RASplus.
Covert Camera View The user can view video from cameras set to Covert while in the Live
Monitoring or Search mode on a local system or a PC running RASplus.
System Check The user can view the remote system status or check the remote system
status as a batch process on a PC running RASplus.
Record Setup The user can establish all Record settings on a local system or a PC running
RASplus.
Search The user can access the Search mode on a local system or a PC running
RASplus.
Clip-Copy The user can copy video clips on a local system or a PC running RASplus,
and save video data in an AVI, bitmap, or JPEG file format.
Table 3-4 New Group Authority Level Assignments
Authority Level Action