Honeywell HRSD16 User Manual Download Page 145

Page: 145 / 176

Reviewing Video Clips

Document 800-03650

Rev D

145

02/09

Click to set up the ClipPlayer properties.

Prints the current image

Frame Info

Displays Channel, Title, Time, Type, Size, and Resolution
information about the image

Image
Processing

Controls brightness, blur, and sharpness of playback images.

Note

Applies to single-screen layout and Pause Mode only.

Play Speed
Control

Changes the playback speed (Play) or fast forward/backward
playback speed (FF/RW).

Drawing
Mode

Selects the draw mode level. To determine the best draw mode
level for your system, experiment with each level until the image
displays properly.

Screen Size Changes the ClipPlayer screen size.

Aspect
Ratio

Changes the image aspect ratio displayed on each camera
screen.

OSD Setup

Selects options to display on the screen.

Enable
Audio

Plays audio while playing back recorded video that has recorded
audio. This feature is available in single-screen layout only.

Anti-Aliasing
Screen

Enhances image display quality on the screen by smoothing
stair-stepping (aliasing) effects in the enlarged image. If video
plays slow because of your CPU slow speed, releasing the
Anti-Aliasing Screen option might improve playback speed.

Show
Text-In

Displays video with text-in data if the video was recorded with
text-in data (single-screen layout only).

Click to save clip images.

Save as
Image

Saves the current image as a bitmap or JPEG file.

Option

ClipPlayer Function

Summary of Contents for HRSD16

















































































































































































Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands

Honeywell HRSD16, User Manual

Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands