Honeywell HRSD16 User Manual Download Page 69

Page: 69 / 176

Configuration

Document 800-03650

Rev D

02/09

Figure 3-41

Display OSD Screen

To toggle an item On and Off, highlight it and press

. When an item is On, there is

a checkmark in the box beside it. The following items can be turned On or Off:

Adjusting the Transparency of the On-Screen Display

To adjust the transparency of the setup screens, highlight Transparency and use the
Left and Right arrows to select a value.

Zoom

displays on the enlarged video.

Network

displays when the unit is connected to a network via either Ethernet or modem.

Freeze &

Sequence

displays when the DVR is in Freeze mode, and the

icon displays when the

DVR is in Sequence mode.

Screen
Group

The number of screen group displays when the DVR is not in the 4x4 display mode
of the 16-channel DVR, and 3x3 mode of the 8-channel DVR.

Free Space

displays when the DVR is in the Recycle mode. The percentage of available

storage space displays when the DVR is not in the Recycle mode.

Date/Time

Displays the current date and time information.

User Name

Displays the name of the current user who is logged in.

Camera No.

Displays the camera number at the top-left corner of each camera screen.

Camera Title

Displays the camera title at the top-left corner of each camera screen.

Record

The record related icons display on each camera screen.

PTZ

displays on each PTZ camera screen.

Text-In

The text input strings display on the screen. You can adjust the Display Dwell time
(sec.) for the text input strings displayed on the screen.

Summary of Contents for HRSD16

















































































































































































Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands

Honeywell HRSD16, User Manual

Search results

Summary of Contents for HRSD16

Reviews:

Related manuals for HRSD16

Brands by name

Popular brands