Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 554 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
518

TRANSFER
lets you export or import projects to or from a flash
drive, and delete projects on the flash drive. The project data
includes all project settings and test results.

MANAGE
lets you rename, copy, or delete a project that is in the
tester:

Rename
: Lets you give the project a new name. The tester
saves all the settings and test results in the project with
the new name.

Copy
: Lets you use the settings in the project to start a
new project. The tester does not put test results into the
new project.

Delete
: Lets you delete the project and all the test results
in the project. The tester shows a warning if you have
uploaded less than 100% of the results to a PC.

To delete the test setup or ID set, tap . To copy the test setup
or ID set so you can edit it to make a new one, tap .
Notes
If you delete an imported ID set from a project,
the ID set is still available in the tester. To delete
imported ID sets from the tester, use LinkWare PC
software. See “Delete an Imported ID Set” on
page 552.
A project must have at least one Test Setup and
one Cable ID set. If you delete them all, the tester
makes a default Test Setup and Cable ID set.
About Project Names from LinkWare Live
Projects you download from LinkWare Live include the organization
name. They can also include subproject names. On the tester’s
PROJECT
screen, these names show in this format:
Organization
Name>>Project Name>>Subproject Name
.