Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 306 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
270
fiber fails, the direction does not tell you the
location of the problem.
Fiber IDs for Saved Results in Smart Remote Mode
If
Auto Save
is
On
and the test passed, the tester saves two
records, one for each fiber. The records have the next two IDs in
the ID list or sequence.
If your IDs are from a list, and you use the last ID in the list, the
tester does not automatically save subsequent results. You must
tap
SAVE
then enter one or both IDs to save the results.
How to Change Fiber IDs Before You Do Tests
Tap the
Next ID
panel on the home screen. On the
CHANGE ID
screen (Figure 114 on page 271), tap the
Input Fiber ID
, then enter
a new ID. The tester automatically sets the
Output Fiber ID
to the
next ID in the list or sequence.
How To Save Results with Non-Consecutive IDs
Set
Auto Save
to
Off
before you do the test. Then, on the
SAVE
RESULT
screen, tap the
Input Fiber ID
or
Output Fiber ID
window
to change the ID. For subsequent IDs, the tester uses the IDs that
follow the
Output Fiber ID
you used.
How to Swap the Input and Output IDs
On the
CHANGE ID
and
SAVE RESULT
screens, you can tap to
swap the input and output IDs. The tester uses subsequent IDs
from the list or sequence in descending order.
Figure 115 shows unsaved and saved results for bi-directional and
uni-directional results.