Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 61 / 700

Chapter 1: Get Acquainted
The HOME Screen
25
The HOME Screen
The
HOME
screen (Figure 6) shows important test settings. Before
you do a test, make sure these settings are correct.
For a home screen with a DSX CableAnalyzer module installed,
see Figure 26 on page 78.
For a home screen with a CertiFiber Pro module installed, see
Figure 105 on page 241.
For a home screen with an OptiFiber Pro module installed, see
Figure 130 on page 308.

PROJECT
: The project contains the settings for a job and helps
you monitor the status of a job. When you save test results, the
tester puts them in the project. Tap the
PROJECT
panel to edit
the project settings, select a different project, or make a new
project.

Shows a summary of the test results in the project:
: The number of tests that passed.
: The number of tests that failed.
The number of results from tests on twisted pair cable that
have
PASS*
results.
PASS*
results have measurements within
the range of accuracy uncertainty for the tester. See “PASS*/
FAIL* Results” on page 98.
 The test setup panel shows the settings the tester will use when
you tap
TEST
or press

.
To change these settings, tap the panel, select the test on the
CHANGE TEST
screen, tap
EDIT
, select different settings on the
TEST SETUP
screen, then tap
SAVE
.