Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 411 / 700

Chapter 11: The OptiFiber Pro OTDR Module
Real Time Trace
375

Tap the settings you want. You can scroll some columns to see
more settings. Table 12 on page 312 gives descriptions of the
settings.
 Select the wavelengths to use for the test.

The
SAVE SETUP
button lets you save your settings:
Active
: The tester saves the settings in the active test setup, and
changes the active
Test Type
to
Manual
. This selection is not
available if the module selected in the active test setup does not
match the installed module.
New
: The tester saves the settings in a new
Manual
test setup
that is added to the project. The tester uses the
Manual
setup
until you save the results or exit the results screen then start a
test from the home screen. Then the tester uses the test setup it
had before you changed the OTDR settings.
If you save your settings in a new test setup
:
The tester uses your settings until you save the results or exit the
results screen then start a test from the home screen. Then the
tester uses the test setup it had before you changed the settings.
If you do not save your settings
:
The tester uses your settings until you save the results or exit the
results screen then start a test from the home screen. Then the
tester uses the test setup it had before you changed the settings.

Tap
RESUME
or press

to do a test with the settings you
selected.