Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 439 / 700

Chapter 12: The OptiFiber Pro HDR OTDR Module
The Home Screen for OptiFiber Pro HDR OTDR Modules
403
: The number of tests that passed.
: The number of tests that failed.

The test setup panel shows the settings the tester will use
when you tap
TEST
or press

. The Auto PON OTDR tests
lets you locate splitters on links and identifies them in the
results.
To change these settings, tap the panel.
Note
You can set up tests for any module that the
tester can use, even when no module is attached.

Next ID
: The
Next ID
panel shows the ID that the tester gives
to the next test results you save.
Tap
Next ID
to do these tasks:
 Enter an ID, select a different ID in the ID set, select a
different set of IDs, or make a new set. The tester adds the
IDs and ID sets you make to the project that shows on the
home screen.
 Turn
Auto Save
on or off.
 Select
End 1
or
End 2
for OTDR and FiberInspector tests.
 Enter a name for
End 1
and
End 2
.

Operator
: The name of the person who does the job. You can
enter a maximum of 20 operator names. For each operator you
can also enter the email address that the operator will use as an
ID to sign in to LinkWare Live.

TOOLS
: The
TOOLS
menu lets you set up the compensation
function for the launch/tail cords, use tools such as the real-
time trace and the FiberInspector test, see the status of the
tester, and set user preferences such as the language and the
display brightness.