Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 561 / 700

Chapter 17: Use Projects
Tutorial: Make a New Project
525
GPU90.EPS
Figure 197. CHANGE CABLE IDs Screen
 The screen shows the ID sets, copper or fiber, for the type of test
setup that shows on the home screen.

The ID set “001” is the default set the tester makes if no other ID
sets are in the project
 To select an ID set, tap the ID set.
 To add an ID set to the project, tap
NEW ID SET
.
 To edit an ID set, tap the set, then tap
EDIT
.
 To use the selected ID set, tap
USE SELECTED
.
C
D
E F
B
A