Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 647 / 700

Chapter 21: Specifications
DSX-5000 CableAnalyzer Module Specifications
611
DSX-5000 Measurement Accuracy
For Class F
A
tests, the DSX-5000 CableAnalyzer modules are
compliant with Level V requirements as in the draft 5
th
edition of
IEC 61935-1.
For Category 6A/Class E
A
tests, the DSX Series CableAnalyzer
modules are compliant with Level IIIe requirements of TIA 1152
and Level IV of IEC 61935-1.
Worst case accuracy performance parameters are used for asterisk
(*) results reporting. These are based on computation of the
overall measurement accuracy based on the worst case of each
parameter at each frequency data point. Observed differences
between laboratory equipment and DSX CableAnalyzer modules
using calibration verification artifacts were used as a
confirmation.
The next table shows the accuracy performance parameters for
the DSX-5000 modules.
DSX-5000 Level V Accuracy Performance Parameters
per IEC Guidelines
Parameter Baseline Field Tester Field Tester with
Level V Permanent
Link Adapter
Field Tester with
Level V Channel
Adapter
Dynamic
range
3 dB over test limit
NEXT and FEXT 65 dB
PS NEXT and FEXT 62 dB
Amplitude
resolution 0.1 dB
Frequency
range and
resolution 1 to 31.25 MHz: 150 kHz
31.25 to 100 MHz: 250 kHz
100 to 250 MHz: 500 kHz
250 to 600 MHz: 1 MHz
600 to 1000 MHz: 2 MHz
-continued-