manualshive.com logo in svg

Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 72 / 700

Share
Download
Fluke CableAnalyzer DSX-5000 Technical Reference Handbook Download Page 72

Versiv Series Cabling Certification Product Family

Technical Reference Handbook

36

About LinkWare Applications

LinkWare PC Cable Test Management Software

The LinkWare PC Cable Test Management software lets you 
upload test records to a PC, organize and examine test results, 
print professional-quality test reports, and do software updates 
and other maintenance procedures on your tester.

You can download LinkWare PC from the Fluke Networks 
website.

The LinkWare Live Web Application

The LinkWare Live web application lets you manage projects from 
a desktop or mobile device.

To get started with LinkWare Live, go to 

www.linkwarelive.com/

signin

. See Chapter 18.

LinkWare Stats

The LinkWare Stats Statistical Report software that is included 
with LinkWare software provides statistical analysis of cable test 
reports and generates browsable, graphical reports. 

For instructions about LinkWare PC and LinkWare Stats software, 
see the guides for getting started and the online help available 
under 

Help

 on the LinkWare PC and LinkWare Stats menus.

Summary of Contents for CableAnalyzer DSX-5000





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments